3-Layer Polyolefin

Our 3 layer coating products start with an FBE primer and a polymeric adhesive.  Next, an outer jacket of HDPE or HDPP is added as the final layer, depending on project specific requirements.

3-Layer Polyethylene (3LPE)

  • FBE primer + polymeric adhesive + HDPE extruded jacket
  • FBE thickness: 10 mils min
  • Adhesive thickness: 8 mils min
  • HDPE thickness: 40 mils min
  • 6 in. min to 48 in. max OD
  • Pipe lengths: 35 ft. min 80 ft. max
  • Max operating temp: 85°C
  • Min handling temp: -40°C
  • Offers superior adhesion, cathodic disbondment resistance and mechanical protection
  • Compliancy: CSA Z245.21-06 B1

3-Layer Polypropylene (3LPP)

  • FBE primer + polymeric adhesive + HDPP extruded jacket
  • FBE thickness: 10 mils min
  • Adhesive thickness: 8 mils min
  • HDPP thickness: 40 mils min
  • 6 in. min to 48 in. max OD
  • Pipe lengths: 35 ft. min 80 ft. max
  • Max operating temp: 150°C
  • Min handling temp: -40°C
  • Offers superior adhesion, cathodic disbondment resistance and mechanical protection
  • Compliancy: CSA Z245.21-06 B1

applications

  • Used in rugged / moderately rocky terrain
  • Ideally suited for directional or bored crossings
  • Exceptional for moist conditions

MEDIA & LITERATURE

Coming Soon

Loading...