FBE ANTI-CORROSION COATING
Fusion Bond Epoxy (FBE) coating is an industry standard, environmentally-safe thermoset polymer coating which is used as corrosion protection for pipe. It is an epoxy-based powder coating widely used in pipeline construction, piping connections, valves and fittings.
FUSION BONDED EPOXY
• Thin film FBE powder
• Typical thickness: 12-18 mils
• 3 in. min to 48 in. max OD
• Pipe lengths up to 80 ft. max
• Max operating temp: 180°C
FBE/ABRASION RESISTANT OVERCOAT(ARO)
• 2-layer FBE system
• Base coat FBE: 12mils min
• Top coat ARO: 18 or 28 mils
• Total thickness: 30 or 40 mils min
• 3 in. min to 48 in. max OD
• Pipe lengths up to 80 ft. max
• Max operating temp: 180°C
• System used primarily for directional drilling and slip bores
FBE/Rough Coat
• 2-layer FBE system
• Base coat FBE: 10 mils min.
• Total thickness: 26 or 36 mils min
• 3 in. min to 48 in. max OD
• Pipe lengths up to 80 ft. max
• Max operating temp: 180°C
• System used in wet/muskeg environments
applications
Used to protect steel pipe used in pipeline construction, piping connections and valves from corrosion. They come under the category of “protective coatings” in paints and coating nomenclature.
MEDIA & LITERATURE
Coming Soon